Posts: 7773
Threads: 42
Joined: Jun 2015
Reputation:
447
All LMs are shipped with industrial-grade cards. The expected lifetime is many years.
If LM only had an on-board flash then it would not be possible to repair the device if storage failed.
Posts: 74
Threads: 21
Joined: Sep 2016
Reputation:
0
I have a Schneider HomeLynk, V3.1.
I haven't opened it, but I assume in have onboard flash and no card?
Posts: 7773
Threads: 42
Joined: Jun 2015
Reputation:
447
All devices have a micro SD card. Some have an additional on-board flash for database/trends. The OS is stored on the micro SD.
Posts: 4
Threads: 2
Joined: May 2023
Reputation:
0
My SD card failed after 8years of continous operation.
The card was not completely broken so I could recover the database.
I have a number of units in operation with similar age, probably a good idea to do some service and change the cards on all units 5+y old? Or was this a one-time fluke?
It had a blue samsung 8GB card installed.
Posts: 4659
Threads: 24
Joined: Aug 2017
Reputation:
212
It is good idea to replace them, new cards are much better but the one like yours will fail most likely at some point.
------------------------------
Ctrl+F5