blind control on Visu

[toujour]

Hi, what is the better way to control a blind from the new Visu ?

When I use this control 

     

I have a problem with the slats ( I think the bit stop doesn't work properly. I can't open and close slats by singol tap on the button.....the stop is always in the same direction).

BR, 
Alberto

[Daniel]

This was designed for window/blind actuator. What is the difference for the shutters?

[toujour]

With the shutters the bit stop always works (0 or 1 value).
With the blinds the bit stop has a sense ( 0 --> open slats by one step , 1 --> close slats by one step ).
for example there are 10 steps to open/close the slats completely

The best think is with short and long command (is it possible ?...or I have to use javascript).
Otherwise...How can I change the value of the stop ?

[Daniel]

Why don't you use byte control instead?

[toujour]

because it has one more tap for use ....and vertical slide is not good in plant (too big) because I have 4 motors for every windows

[toujour]

one think.....I'm using the step control (it is good with long and short !!) but I have a problem.

I have the central stop button changes state by the Movement status
   
   

I think the change active state could be at the up/down button and not on the stop button (or their could change by the position status).

am I doing something wrong?

BR,
Alberto

[Daniel]

It shows what is the active state, if blinds move then the left/right is highlighted if stop then the middle.

[toujour]

ok, but I don't see the final status of the blind....closed or opened ?

[Daniel]

It is not about blind status, it is about, is it moving or did it stop. There is position status object which can display position in %, use icon and value.

[toujour]

Hi,

is it possible insert an option that send the stop when I release the button ?

[admin]

Do you mean when short/long press option is enabled?

[PolymorphedCust]

Is there no widget on Visu that displays in graphic, what stage the blinds are? In Mosiac we could choose whether it was sideways or up/down.. Now we only got 3 buttons (up, stop, down). No % indication of blind stage.. ?

[admin]

You can attach Position status object to the widget. In Plan view you can use additional icons to display a different icon depending on the status value.

[PolymorphedCust]

But not in Tile View?

[Daniel]

Show value on the opposite side of widget's title

[PolymorphedCust]

Yeah, okay. But no graphical feedback.. Thanks for the answer

---

Is it possible to lock the menu on the left, så that it always is visible?

[Daniel]

See General settings - Menu display

[PolymorphedCust]

Sorry, I dont see that?...

[Daniel]

This is option for Plan, for Tile this is set to auto hide otherwise you will see nothing on mobile.

[toujour]

Do you mean when short/long press option is enabled?

yes