8 hours ago
Good morning,
I need some help. I have three different logic machines, each connected to a gateway that connects to a Circutor three-phase energy meter.
I created a profile for this three-phase energy meter and loaded it onto all three logic machines. I also created links to the group addresses of the devices generated from this profile for each three-phase meter.
Finally, I enabled the local > IP filters on portals 2 and 3 so that all the meter data from the logic machine in portal 1 is received in portal 1. However, it's not working with portal 2; it's sending very strange values. I'm not sure if I'm doing it correctly to obtain the Modbus data in a single logic machine.
I need some help. I have three different logic machines, each connected to a gateway that connects to a Circutor three-phase energy meter.
I created a profile for this three-phase energy meter and loaded it onto all three logic machines. I also created links to the group addresses of the devices generated from this profile for each three-phase meter.
Finally, I enabled the local > IP filters on portals 2 and 3 so that all the meter data from the logic machine in portal 1 is received in portal 1. However, it's not working with portal 2; it's sending very strange values. I'm not sure if I'm doing it correctly to obtain the Modbus data in a single logic machine.
