This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

DALI MANAGEMENT
#1
Hi,

is there an app or something to configure and monitoring dali ballasts and devices?

Tnx

Peppe
Reply
#2
Hi
For configuration the external tools are best like this
http://www.tridonic.com/com/en/software-...urator.asp
You can monitor by scripts. All the commands are here http://openrb.com/docs/dali.htm
There is an app on its way but it is in beta state right now.
BR
------------------------------
Ctrl+F5
Reply
#3
(23.03.2018, 12:36)Daniel. Wrote: Hi
For configuration the external tools are best like this
http://www.tridonic.com/com/en/software-...urator.asp
You can monitor by scripts. All the commands are here http://openrb.com/docs/dali.htm
There is an app on its way but it is in beta state right now.
BR
Reply
#4
Hello,
I was in a underground tunnel without possibility to connect to internet. I needed install DALI app in a Spacelynk, but browser wrote "DNS error".

Can I install from file the dali app? Where i can find it?

When i backup a visualisation with app the app are not backupped. What I must do for have the comoplete backup?

Best regards.
Reply
#5
Hi
It is SE app and they do not want to share it as a file. You need to ask SE but I heard you already did.
BR
------------------------------
Ctrl+F5
Reply
#6
Hi,
If I create visualisation on a homelink connetcted to internet and insert the app fon each dali gateway,the only mode to transfer the full visualizzation on Spacelynk is manipolate the sd card internal of spacelynk/homelynk?

Best regards
FR
Reply
#7
Hi
Card image would do the trick.
BR
------------------------------
Ctrl+F5
Reply
#8
extract it and duplicate?
Also if i prepare on homelynk and transfer on spacelink?
FR
Reply
#9
No this will not work. Image from SL will not work on HL and other way around.  Project backup can be transferred.
------------------------------
Ctrl+F5
Reply
#10
but so I can't transfer the app.

FR
Reply


Forum Jump: