20.11.2018, 10:24
So normally it should be visible, but at this moment to create such filter I must type 14/0/*, 14/1/* etc.
I will try, I know that in ETS there is also same situation that you can type 14/0/* or define range. When I've tried add range from 14/0/0-15/7/255 then all probably work well because I see addresses in filter in LM after reboot
I will try, I know that in ETS there is also same situation that you can type 14/0/* or define range. When I've tried add range from 14/0/0-15/7/255 then all probably work well because I see addresses in filter in LM after reboot
Done is better than perfect