This is what I get as result:
* string: ntpd: resolved peer 0.ch.pool.ntp.org to 81.94.123.16
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.137866 delay:0.030351 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x01
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.134459 delay:0.038311 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x03
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.134637 delay:0.038405 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x07
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.134215 delay:0.037433 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x0f
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.135192 delay:0.038626 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x1f
ntpd: setting time to 2016-04-24 09:09:34.944574 (offset -466.135192s)
Running the script set the time correctly, however it was wrong before. I export data every minute to a .csv file, you can see the time jump backwards from 9:17:00 to 09:10:30. The time was running away before and I did not change anything in the NTP settings, I just ran the script, nothing else.
2016.04.24 09:16:41 Keller Differenz abs. Feuchtigkeit zu Umgebung 3.89938163757
2016.04.24 09:17:00 Aussen rel. Feuchtigkeit 86.4
2016.04.24 09:17:00 Aussen Taupunkt 0.4
2016.04.24 09:17:00 Helligkeit Nord 4275.2
2016.04.24 09:17:00 Aussen abs. Feuchtigkeit 4.95355892181
2016.04.24 09:17:00 Aussen Temperatur 2.4
2016.04.24 09:10:30 Aussen Temperatur 2.4
2016.04.24 09:10:40 Keller abs. Feuchtigkeit 8.84268665314
2016.04.24 09:10:40 Keller Temperatur 15.9
* string: ntpd: resolved peer 0.ch.pool.ntp.org to 81.94.123.16
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.137866 delay:0.030351 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x01
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.134459 delay:0.038311 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x03
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.134637 delay:0.038405 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x07
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.134215 delay:0.037433 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x0f
ntpd: sending query to 81.94.123.16
ntpd: reply from 81.94.123.16: offset:-466.135192 delay:0.038626 status:0x24 strat:2 refid:0x4a199e55 rootdelay:0.000214 reach:0x1f
ntpd: setting time to 2016-04-24 09:09:34.944574 (offset -466.135192s)
Running the script set the time correctly, however it was wrong before. I export data every minute to a .csv file, you can see the time jump backwards from 9:17:00 to 09:10:30. The time was running away before and I did not change anything in the NTP settings, I just ran the script, nothing else.
2016.04.24 09:16:41 Keller Differenz abs. Feuchtigkeit zu Umgebung 3.89938163757
2016.04.24 09:17:00 Aussen rel. Feuchtigkeit 86.4
2016.04.24 09:17:00 Aussen Taupunkt 0.4
2016.04.24 09:17:00 Helligkeit Nord 4275.2
2016.04.24 09:17:00 Aussen abs. Feuchtigkeit 4.95355892181
2016.04.24 09:17:00 Aussen Temperatur 2.4
2016.04.24 09:10:30 Aussen Temperatur 2.4
2016.04.24 09:10:40 Keller abs. Feuchtigkeit 8.84268665314
2016.04.24 09:10:40 Keller Temperatur 15.9