20.06.2019, 13:17
Here is the basic configuration of all the material that should be reassembled on a Spacelynk.
When I search the servers BACNET I find only the heat pump and the C.T.A. I passed in Modbus IP thereafter for the C.T.A (Lot of objects).
On the second Spacelynk I manage to find all the cassettes with the BACNET gateway IP to PS / TP (With 14 air conditioning cassettes behind) I would like to go up the temperature of each room and set tapes.
when I click on one of the tapes on the second SPACELYNK version 2.0.1 (ARM926EJ-S rev 5 (v5l)) the application turns but finds no objects.
On the first as said I do not find them when looking for BACNET server.
Is it possible to perform a mapping of the objects of a BACNET server from a script?
then choose the objects in order to write them on the KNX?
See if since the scripts these work?
B.R.
When I search the servers BACNET I find only the heat pump and the C.T.A. I passed in Modbus IP thereafter for the C.T.A (Lot of objects).
On the second Spacelynk I manage to find all the cassettes with the BACNET gateway IP to PS / TP (With 14 air conditioning cassettes behind) I would like to go up the temperature of each room and set tapes.
when I click on one of the tapes on the second SPACELYNK version 2.0.1 (ARM926EJ-S rev 5 (v5l)) the application turns but finds no objects.
On the first as said I do not find them when looking for BACNET server.
Is it possible to perform a mapping of the objects of a BACNET server from a script?
then choose the objects in order to write them on the KNX?
See if since the scripts these work?
B.R.