Thanks 
!
Have adapted the title of the thread to: Energy Monitor/ 3-Phase Power / Modbus Profile EMU Professional 3/5 TCP/IP so beginners as me will find it more easaly.
Just as a recomendation:
Split this topic in this Forum into different kinds of Hardwaer, like Temperature sensor, Energy meters etc. That’s for marketing reasons too. Not everyone looks at the topic as closely as I do. The title of the thread should always carry the general topic – special for the spiders of the search engines. Shows potential customers more clearly, what the logicmachine actually is for and where it has already been tried and tested.
The possibilities are endless. I thinks, this thing getting definitely big (and when I posted that, it usually turned out that way) but that will also be due to your market strategy.
As soon i have the whole Profile finish i will add. It a new post to here:
Last Add :
Here we go without warranty:
{
"manufacturer": "Hugo",
"description": "EMU_Professional_TCP_IP-LM5_Profile_V4.1"
"mapping": [
{ "name": "active energy total", "bus_datatype": "int64", "datatype": "int64", "type": "register", "address": 4201, "value_multiplier": 0.001, "units": "kWh" },
{ "name": "active energy current", "bus_datatype": "int32", "datatype": "int32", "type": "register", "address": 4527, "units": "W" },
{ "name": "Max. effective power over 15 min.", "bus_datatype": "int32", "datatype": "int32", "type": "register", "address": 4553, "value_multiplier": 0.001, "units": "kW" },
{ "name": "Instantaneous current total", "bus_datatype": "int32", "datatype": "int32", "type": "register", "address": 4597,"value_multiplier": 0.001, "units": "A" }
]
}
Note: The above are only examples for the total of all 3 phases of 1 out of 4 possible tariffs. According to the manufacturer's description linked in the first post, 4 profiles are required to read out all meter's data (since one profile can not handel the volume of data`s).
!Have adapted the title of the thread to: Energy Monitor/ 3-Phase Power / Modbus Profile EMU Professional 3/5 TCP/IP so beginners as me will find it more easaly.
Just as a recomendation:
Split this topic in this Forum into different kinds of Hardwaer, like Temperature sensor, Energy meters etc. That’s for marketing reasons too. Not everyone looks at the topic as closely as I do. The title of the thread should always carry the general topic – special for the spiders of the search engines. Shows potential customers more clearly, what the logicmachine actually is for and where it has already been tried and tested.
The possibilities are endless. I thinks, this thing getting definitely big (and when I posted that, it usually turned out that way) but that will also be due to your market strategy.
As soon i have the whole Profile finish i will add. It a new post to here:
Last Add :
Here we go without warranty:
{
"manufacturer": "Hugo",
"description": "EMU_Professional_TCP_IP-LM5_Profile_V4.1"
"mapping": [
{ "name": "active energy total", "bus_datatype": "int64", "datatype": "int64", "type": "register", "address": 4201, "value_multiplier": 0.001, "units": "kWh" },
{ "name": "active energy current", "bus_datatype": "int32", "datatype": "int32", "type": "register", "address": 4527, "units": "W" },
{ "name": "Max. effective power over 15 min.", "bus_datatype": "int32", "datatype": "int32", "type": "register", "address": 4553, "value_multiplier": 0.001, "units": "kW" },
{ "name": "Instantaneous current total", "bus_datatype": "int32", "datatype": "int32", "type": "register", "address": 4597,"value_multiplier": 0.001, "units": "A" }
]
}
Note: The above are only examples for the total of all 3 phases of 1 out of 4 possible tariffs. According to the manufacturer's description linked in the first post, 4 profiles are required to read out all meter's data (since one profile can not handel the volume of data`s).