Reactor remote CONN

[Frank68]

This means that LM cannot reach the remote network. Check that you have a valid gateway in LM and that you can ping VPN server from LM (System config > Status > Network utilities > Ping).

Your config is not fully valid:
1. Replace auth-user-pass in your config with dev tun0
2. Don't forget to add two pull-filter lines I've mentioned before <ca> line

 OK now works

But now is not possible to reached the LM

IP for LM 192.168.0.101 not responding

IP LM witj OpenVPN 10.8.0.10 not responding

why ?