Zigbee gateway integration

[stativko]

Hello.


Is SONOFF ZigBee 3.0 USB Dongle Plus with a Z-Stack coordinator (CC1352P2_CC2652P_launchpad_*.zip v 20220219) supported out of the box with Zigbee app v20220322? Zigbee has a red dot in the status bar.



As I understand, that dongle uses a different serial port /dev/ttyUSB0 (instead of /dev/ttyACM0 for CC2531). Is it possible to change the port or modify the Zigbee app configuration programmatically?


Thank you in advance!

HW: LM5 Lite + Ext (i.MX6) SW: 20211215 | Serial port list with a connected dongle /dev/ttyUSB0 ITead - Sonoff Zigbee 3.0 USB Dongle Plus

Code:

Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.041921] usb 1-1: cp210x converter now attached to ttyUSB0
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.041388] cp210x 1-1:1.0: cp210x converter detected
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038393] usb 1-1: SerialNumber: ec13ecb57829ec119dd66d7840c9ce8d
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038381] usb 1-1: Manufacturer: ITead
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038369] usb 1-1: Product: Sonoff Zigbee 3.0 USB Dongle Plus
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038357] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038330] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60
Apr 13 13:00:56 LogicMachine kern.info kernel: [ 240.895497] usb 1-1: new full-speed USB device number 3 using ci_hdrc