02.01.2017, 14:58
Hi,
I've cut a Patch cable in half and added 24V from my cabinet transfo onto the cable. Everything worked fine.
Now i needed to place the LM Ambien in the living room, only problem as stated in my first post is that i only have SVV cable running in the house so i connected a piece of UTP + RJ45 connector on each side and i connected the cable to my 16port POE Switch and activated the 24V Passive POE.
when i wave to the Ambient i get the LED's working so the 24V is working. But i didn't get to see the ambien on my network so i did a cable test from the switch web interface where is got "crosstalk" as cable status.
Might this be the problem ? no data transmission over the SVV cable ?
greetings
I've cut a Patch cable in half and added 24V from my cabinet transfo onto the cable. Everything worked fine.
Now i needed to place the LM Ambien in the living room, only problem as stated in my first post is that i only have SVV cable running in the house so i connected a piece of UTP + RJ45 connector on each side and i connected the cable to my 16port POE Switch and activated the 24V Passive POE.
when i wave to the Ambient i get the LED's working so the 24V is working. But i didn't get to see the ambien on my network so i did a cable test from the switch web interface where is got "crosstalk" as cable status.
Might this be the problem ? no data transmission over the SVV cable ?
greetings