16.03.2023, 05:33
syetem log:
Code:
Mar 16 05:27:54 user kern.info kernel: [438748.611355] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Mar 16 05:27:33 user kern.info kernel: [438726.802925] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB1
Mar 16 05:27:33 user kern.info kernel: [438726.801162] usb 1-1: Detected FT232RL
Mar 16 05:27:33 user kern.info kernel: [438726.800979] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
Mar 16 05:27:33 user kern.info kernel: [438726.794721] usb 1-1: SerialNumber: FTXKSJ0R
Mar 16 05:27:33 user kern.info kernel: [438726.794712] usb 1-1: Manufacturer: EnOcean GmbH
Mar 16 05:27:33 user kern.info kernel: [438726.794701] usb 1-1: Product: EnOcean USB 300F DA
Mar 16 05:27:33 user kern.info kernel: [438726.794690] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 16 05:27:33 user kern.info kernel: [438726.794665] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
Mar 16 05:27:32 user kern.info kernel: [438726.647669] usb 1-1: new full-speed USB device number 3 using ci_hdrc
Mar 16 05:27:29 user kern.info kernel: [438723.496218] ftdi_sio 1-1:1.0: device disconnected
Mar 16 05:27:29 user kern.info kernel: [438723.496154] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Mar 16 05:27:29 user kern.info kernel: [438723.495597] usb 1-1: USB disconnect, device number 2
Mar 16 05:27:28 user kern.info kernel: [438722.199963] fec 2188000.ethernet eth0: Link is Down
Mar 11 03:35:25 user user.info sysinit: 1678505725: Warning: Unable to drop privileges to 'mosquitto' because this user does not exist. Trying 'nobody' instead.
Mar 11 03:35:25 user user.info sysinit: chown: unknown user mosquitto
Mar 11 03:35:24 user kern.notice kernel: [ 10.880062] random: nonblocking pool is initialized
Mar 11 03:35:19 user kern.info kernel: [ 5.443703] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Mar 11 03:35:17 user user.info sysinit: /lib/genohm-scada/storage/db/current.db: OK
Mar 11 03:35:16 user kern.info kernel: [ 2.624469] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc
Mar 11 03:35:16 user user.info sysinit: /dev/mmcblk0p3: clean, 1558/468640 files, 84016/1873920 blocks
Mar 11 03:35:16 user user.info sysinit: /dev/mmcblk0p3: recovering journal
Mar 11 03:35:16 user user.info sysinit: e2fsck 1.45.6 (20-Mar-2020)
Mar 11 03:35:16 user kern.info kernel: [ 2.427660] fec 2188000.ethernet eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=-1)
Mar 11 03:35:15 user kern.info kernel: [ 1.362107] fec 2188000.ethernet eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=-1)
Mar 11 03:35:15 user kern.info kernel: [ 0.950150] EXT4-fs (mmcblk0p2): re-mounted. Opts: nodelalloc
Mar 11 03:35:15 user kern.info kernel: [ 0.665474] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
Mar 11 03:35:15 user kern.info kernel: [ 0.663809] usb 1-1: Detected FT232RL
Mar 11 03:35:15 user kern.info kernel: [ 0.663643] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
Mar 11 03:35:15 user kern.info kernel: [ 0.659507] usb 1-1: SerialNumber: FTXKSJ0R
Mar 11 03:35:15 user kern.info kernel: [ 0.659495] usb 1-1: Manufacturer: EnOcean GmbH
Mar 11 03:35:15 user kern.info kernel: [ 0.659483] usb 1-1: Product: EnOcean USB 300F DA
Mar 11 03:35:15 user kern.info kernel: [ 0.659471] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 11 03:35:15 user kern.info kernel: [ 0.659446] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
Mar 11 03:35:15 user kern.info kernel: [ 0.543862] Freeing unused kernel memory: 164K
Mar 11 03:35:15 user kern.info kernel: [ 0.543597] VFS: Mounted root (ext3 filesystem) on device 179:2.
Mar 11 03:35:15 user kern.info kernel: [ 0.543513] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Mar 11 03:35:15 user kern.info kernel: [ 0.542180] EXT4-fs (mmcblk0p2): recovery complete
Mar 11 03:35:15 user kern.info kernel: [ 0.511360] usb 1-1: new full-speed USB device number 2 using ci_hdrc
Mar 11 03:35:15 user kern.info kernel: [ 0.414191] mmcblk0: p1 p2 p3
Mar 11 03:35:15 user kern.info kernel: [ 0.412665] mmcblk0: mmc0:aaaa WD08G 7.40 GiB
Mar 11 03:35:15 user kern.info kernel: [ 0.411857] mmc0: new high speed SDHC card at address aaaa
Mar 11 03:35:15 user kern.warn kernel: [ 0.404560] mmc0: host does not support reading read-only switch, assuming write-enable
Mar 11 03:35:15 user kern.info kernel: [ 0.387524] Waiting for root device /dev/mmcblk0p2...
Mar 11 03:35:15 user kern.err kernel: [ 0.387452] Warning: unable to open an initial console.
Mar 11 03:35:15 user kern.info kernel: [ 0.387029] vdd3p0: disabling
Mar 11 03:35:15 user kern.info kernel: [ 0.386451] rtc-pcf85263a 0-0051: setting system clock to 2023-03-11 03:35:14 UTC (1678505714)
Mar 11 03:35:15 user kern.info kernel: [ 0.381054] can: raw protocol (rev 20120528)
Mar 11 03:35:15 user kern.info kernel: [ 0.381004] NET: Registered protocol family 29
Mar 11 03:35:15 user kern.info kernel: [ 0.380850] can: controller area network core (rev 20120528 abi 9)