1.Dmx control I'm a novice, the command of DMX.set(id, value) not only corresponding to the channel in the RGB light strips, but also related to the address? For example, R, G, and B in the light strip address 1 correspond to channel 1, channel 2, and channel 3; R, G, and B in the light strip address 2 correspond to channels 4, 5, and 6. Is my understanding correct?
2.The IC type of the lamp strip is "UCS512C4". The lamp manufacturer provides a lamp strip and a step-down power adapter. The lamp manufacturer said that the decoder has been integrated into the lamp strip, except for the power cord, only the A and B lines are available. My script refers to the script here:https://openrb.com/example-dmx-lighting-control-with-lm2/ .The lamp strip does not work when I connect it to the gateway RS485 interface.
2.The IC type of the lamp strip is "UCS512C4". The lamp manufacturer provides a lamp strip and a step-down power adapter. The lamp manufacturer said that the decoder has been integrated into the lamp strip, except for the power cord, only the A and B lines are available. My script refers to the script here:https://openrb.com/example-dmx-lighting-control-with-lm2/ .The lamp strip does not work when I connect it to the gateway RS485 interface.