30.03.2023, 07:57
Hi admin,
1- When enabled the persistent connection, I cannot reach the devices.
2- All gnd are connected.
3- read_delay is affected slightly.
Should read_delay be different for each device on the same line? First is 0.1, second one is 0.2 etc. ?
1- When enabled the persistent connection, I cannot reach the devices.
2- All gnd are connected.
3- read_delay is affected slightly.
Should read_delay be different for each device on the same line? First is 0.1, second one is 0.2 etc. ?