This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

CANx 0-10V
#8
Firmware: https://dl.openrb.com/canx/ao8-lora_20230704.bin
Profile: https://dl.openrb.com/canx/EMBS-AO8.json (CANx app: Tools > Upload device profile)

Flashing via USB:
Download and install STM32CubeProgrammer software.
  • Connect USB to the board while holding the programming button. If STM32CubeProgrammer is already running then click refresh (1)
  • Click open file (2) and select firmware binary file
  • Select 0x08000000 in the address dropdown (3)
  • Click Download (4)

   
Reply


Messages In This Thread
CANx 0-10V - by KoBra - 13.06.2023, 10:38
RE: CANx 0-10V - by admin - 15.06.2023, 11:16
RE: CANx 0-10V - by KoBra - 15.06.2023, 14:03
RE: CANx 0-10V - by admin - 16.06.2023, 13:36
RE: CANx 0-10V - by KoBra - 16.06.2023, 13:56
RE: CANx 0-10V - by admin - 05.07.2023, 14:25
RE: CANx 0-10V - by KoBra - 28.08.2023, 13:48
RE: CANx 0-10V - by admin - 30.08.2023, 07:20
RE: CANx 0-10V - by KoBra - 07.10.2023, 12:12
RE: CANx 0-10V - by admin - 09.10.2023, 06:09
RE: CANx 0-10V - by aicanx - 15.01.2024, 10:12
RE: CANx 0-10V - by admin - 15.01.2024, 10:20

Forum Jump: