CANx 0-10V

[KoBra]

Firmware: https://dl.openrb.com/canx/ao8-lora_20230704.bin
Profile: https://dl.openrb.com/canx/EMBS-AO8.json (CANx app: Tools > Upload device profile)

Flashing via USB:
Download and install STM32CubeProgrammer software.

• Connect USB to the board while holding the programming button. If STM32CubeProgrammer is already running then click refresh (1)
  
• Click open file (2) and select firmware binary file
  
• Select 0x08000000 in the address dropdown (3)
  
• Click Download (4)
  

I uploaded the FW and changed the profile but max is still 10 seconds it shows device mismatch as the PRofile is not for the LORA type.