24.11.2023, 11:19
(24.11.2023, 10:59)johanax Wrote:(24.11.2023, 09:15)johanax Wrote:Hi,(24.11.2023, 07:53)johanax Wrote:(01.06.2017, 16:36)nhieulk Wrote:(01.06.2017, 08:20)AEK Wrote: There was no AO on LM3. if you mean lm3 Reactor, unfortunatly 0.3V is minimum voltage for that device/
Yes, LM3 reactor
(01.06.2017, 08:22)admin Wrote: Yes, there's an issue with some devices with 0-10V input where it does not turn off.
LM5 reactors have different analog output schematics and this issue is fixed.
Thank you so much
Hi,
I have the same problem with 0.3V as minimum voltage on A0 for my LM3 Reactor V.1, is there any fix for this or is the only solution to buy en new device?
Hi again,
it will be used as 0-10v input to a 3RS7000-1AE00 isolation amplifier, see attached datasheet.
It does not work since I need the output from the amplifier to be 0-10v but since the output from my LM3 is 0.3-10V is also the output from the amplifier 0.3-10V.
OK, do you have any Black Friday deals on a new Reactor?