09.02.2017, 07:14
We do not have a profile for this device but it is well documented so creating a profile should not be too hard.
Start by using RTU read test to read registers with known values like voltage or frequency. You might have to play with Read swap settings and sometimes you need to subtract 1 from the register address that is specified in the documentation.
Docs: http://openrb.com/docs/modbus.htm
Start by using RTU read test to read registers with known values like voltage or frequency. You might have to play with Read swap settings and sometimes you need to subtract 1 from the register address that is specified in the documentation.
Docs: http://openrb.com/docs/modbus.htm