04.06.2024, 07:15
(13.02.2020, 09:04)baggins Wrote: @Daniel
In case you should still have some doubts about changing scale factors:
As you can see it really changes
Unfortunatly the SF Scale factor is not constantly the same. So value 30000 with SF - 2 is 300 using a value multiplier of 0.01. But later it will be SF -3 so multiplier 0.001 must be used. I now have faulty readings from time to time. Is there a possibility to use this inside a modbus profile in LM? Or is an extra event script needed?