19.12.2024, 08:58
Are using the LM5 lite as a BACnet server and export KNX objects to BACnet.
When I poll from BACnet client towards the LM5 it often get no response.
That device polls data every second. If I adjust so it polls only every minute the same happens. Sometime it gets data and sometimes not. We also have an another device on the same network acting the same towards LM5. Tried polling 15 sec, 1 minute on that device. Often it could work one minute and fail the another and comeback after 3-5 minutes.
Unfortunately the device we are using is not able to use COV towards the LM5.
CPU, memory load and all seems normal and low. Same with KNX side, not much traffic and normal response in the webserver for the LM5. Reboot with no effect.
HW: LM5 Lite (i.MX6)
SW: 20230607
When I poll from BACnet client towards the LM5 it often get no response.
That device polls data every second. If I adjust so it polls only every minute the same happens. Sometime it gets data and sometimes not. We also have an another device on the same network acting the same towards LM5. Tried polling 15 sec, 1 minute on that device. Often it could work one minute and fail the another and comeback after 3-5 minutes.
Unfortunately the device we are using is not able to use COV towards the LM5.
CPU, memory load and all seems normal and low. Same with KNX side, not much traffic and normal response in the webserver for the LM5. Reboot with no effect.
HW: LM5 Lite (i.MX6)
SW: 20230607