11.03.2025, 07:12
(This post was last modified: 11.03.2025, 07:13 by nhemtman.
Edit Reason: HTML-code
)
Hi,
Could any of you help me? I need help with registers 138-139. It's a BITMAP32 register, where 0-15 are read as LSW and 16-31 are read as MSW (see example below), how are these parameterized in the modbus profile? I also attached the manual and the modbus profile I made. Thanks!
0x00100071 > Byte 1 ( 0x00 ), Byte 2 (0x71), Byte 3 (0x00), Byte 4 (0x10)
MSB, LSW
MSB: Most significant byte first
LSW: Least significant word first
In That example the following bits are set(counting starting at 0):
Could any of you help me? I need help with registers 138-139. It's a BITMAP32 register, where 0-15 are read as LSW and 16-31 are read as MSW (see example below), how are these parameterized in the modbus profile? I also attached the manual and the modbus profile I made. Thanks!
0x00100071 > Byte 1 ( 0x00 ), Byte 2 (0x71), Byte 3 (0x00), Byte 4 (0x10)
MSB, LSW
MSB: Most significant byte first
LSW: Least significant word first
In That example the following bits are set(counting starting at 0):
- 0 sensor error
- 5 pump 1 alarm
- 6 pump 2 alarm
- 7 pump 3 alarm
- 20 net supply