08.04.2025, 10:42
(07.11.2024, 12:46)admin Wrote: In the next firmware the minimum settable delta will be 0.001 while the default will stay at 0.2 when delta is not specified.
Delta is used to compare the current object value with the new value from the Modbus side after all additional conversions are done. Delta value is used as is, it is not affected by any profile fields.
Hi, is still minimum delta at 0.2 in firmware 20240426? Is there any way to set a lower value? I've some heat meters in MWh and 0.2 is too high...