Yesterday, 09:42
(02.05.2025, 13:24)admin Wrote: Use this to make a profile: https://forum.logicmachine.net/showthread.php?tid=5911
I know how to make profiles. And the profile is also working but the info i get from LG is that i have 2 data types i can't understand how they are read as they call them:
HEMS_R_FAULT_MSG
address 1150 32bits bitmask
bitmask
// 00 : Communication Error
// 01 : Over Temperature Alarm
// 02 : Over Temperature Warning
// 03 : Under Temperature Alarm
// 04 : Under Temperature Warning
// 05 : Over Charge Current Alarm
// 06 : Over Charge Current Warning
// 07 : Over Discharge Current Alarm
// 08 : Over Discharge Current Warning
// 09 : Over Voltage Alarm
// 10 : Over Voltage Warning
// 11 : Under Voltage Alarm
// 12 : Under Voltage Warning
// 13 : Under State of Charge Min Alarm
// 14 : Under State of Charge Min Warning
// 15 : Over State of Charge Max Alarm
// 16 : Over State of Charge Max Warning
// 17 : Voltage Imbalance Warning
// 18 : Temperature Imbalance Alarm
// 19 : Temperature Imbalance Warning
// 20 : Contactor Error
// 21 : Fan Error
// 22 : Ground Fault Error
// 23 : Open Door Error
// 24 : Current Imbalance Warning
// 25 : Other Battery Alarm
address 1151 32bits bitmask
// 26 : Other Battery Warning
// 27 : Reserved
// 28 : Configuration Alarm
// 29 : Configuration Warning
and another one is:
HEMS_RW_POWER_METER_ACTIVE_POWER
1162
4bytes
big-endian
x 100 3407 → 34.07W
1163