20.08.2025, 12:19
Hello,
We previously succeeded with this type of connection via ZeroTier using an IP router, but this time we were not successful when using an IP interface. Our goal is to send programs to KNX devices through LM via ZeroTier. On site, the LM connection is through an IP interface.
We connected to the Logic Machine via ZeroTier. We opened ETS, entered the Logic Machine IP address and port number in the bus section, and when we pressed the test button, we saw the "OK" message. However, we couldn’t download the program from ETS.
I shared the following as image files:
We previously succeeded with this type of connection via ZeroTier using an IP router, but this time we were not successful when using an IP interface. Our goal is to send programs to KNX devices through LM via ZeroTier. On site, the LM connection is through an IP interface.
We connected to the Logic Machine via ZeroTier. We opened ETS, entered the Logic Machine IP address and port number in the bus section, and when we pressed the test button, we saw the "OK" message. However, we couldn’t download the program from ETS.
I shared the following as image files:
- LM KNX settings
- ZeroTier connection settings
- ETS connection settings
- IP interface configuration in ETS