Fallo recuperacion Backup

[Tofolmp]

Browser.

Good morning,
What would be the correct procedure to restore a backup on a LogicMachine?
Based on our tests, we believe the process should be as follows. Please confirm if this is correct or let us know if there are any mistakes:

1. Reset the LogicMachine to factory defaults to start from a clean state.
   
2. Update the firmware and signature to the same version as the original LogicMachine at the time the backup was created.
   
3. From System Config → System, restore the configuration using the modified backup you provided (which you confirmed is working correctly).
   

Is this procedure correct?
Thank you in advance.