Zigbee gateway integration

[oliver.brown.knx]

Thank you for your help. Below is a summary of the status.

lumi.curtain.acn002:
Control and status via group addresses are not working.
Device status (during manual control), position, etc., are not displayed in group addresses.
Probably working in the monitor:
AnalogOutput ReportAttributes AttributeReports = [ { Attribute = { Type = single, Value = 0 }, AttributeIdentifier = 85 }, { Attribute = { Type = uint32, Value = 0 }, AttributeIdentifier = 61440 } ]
MultistateOutput ReportAttributes AttributeReports = [ { Attribute = { Type = uint16, Value = 2 }, AttributeIdentifier = 85 }, { Attribute = { Type = uint32, Value = 1711872 }, AttributeIdentifier = 61440 } ]

lumi.motion.ac02
Device status (during manual control), position, etc., are not displayed in group addresses.
Probably functional in the monitor:
ManuSpecificAqaraOpple ReportAttributes AttributeReports = [ { Attribute = { Type = uint32, Value = 65690 }, AttributeIdentifier = 274 } ]