Zelio TCP

[gilles38]

Hi all,
I'm trying to communicate with a zelio (micro PLC) via the modbus TCP connexion

my zelio is equiped with a SR3NET01BD

it have the following register table


so I have created the following profile:

Code:

{
  "manufacturer": "Schneider Electric",
  "name": "Zelio",
  "description": "Zelio TCP SR3 NET01BD",
  "product_code": "SR3NET01BD",
  "mapping": [
{
      "address": 4017, "bus_datatype": "uint16", "type": "register", "name": "Input 1 XT1", "datatype": "uint16","writable": true
    }
  ]
}

I can import it
I can create a TCP device using this profile (with same IP adress of zelio, default port:502, device adress:1 and default poll intervale)

I can map a knx Address with the correct format...

but in Zelio nothing happen the registers stay blank

do you have an idea ?