10.07.2017, 17:16
Reactor v3 has no Resistive inputs. You can try connecting it shown on this picture: https://en.wikipedia.org/wiki/Voltage_di...ve_divider
Where R1 is PT1000 sensor, R2 is fixed 1K resistor, Vin goes to 24V, Vout goes to Analog input. This way you can calculate sensor's resistance and convert it to temperature.
Where R1 is PT1000 sensor, R2 is fixed 1K resistor, Vin goes to 24V, Vout goes to Analog input. This way you can calculate sensor's resistance and convert it to temperature.