21.07.2017, 17:29
Hi,
Please use English next time (:
Under System -> Network -> KNX Connection there are 2 tabs for filters, 1 for incomming traffic and 1 for outgoing traffic. Here you can set filter policy and filter on physical addresses or group (range) addresses.
BR,
Erwin
Please use English next time (:
Under System -> Network -> KNX Connection there are 2 tabs for filters, 1 for incomming traffic and 1 for outgoing traffic. Here you can set filter policy and filter on physical addresses or group (range) addresses.
BR,
Erwin