You can get a universal wireless remote control with it's receiver and connect the receivers output on the LM I/O ports or some other I/O module.
I have used the above suggestions with some somfy blinds. The customer wanted to keep somfy remote controls but also to be able to control them from LM. So basicaly I rerouted somfy's receiver output to a I/O port on the LM and connect blind motor on a bus actuator.
I have used the above suggestions with some somfy blinds. The customer wanted to keep somfy remote controls but also to be able to control them from LM. So basicaly I rerouted somfy's receiver output to a I/O port on the LM and connect blind motor on a bus actuator.