Hi vbhoj74,
To control your fan with a KNX actuator, you have to use a dedicated fan actuator as the embedded electronic circuits are designed to dealt with that type of load :
Use the dedicated KNX Fan Coil Actuator MTN645094 with 3 fan stages for example or equivalent. Just make sure that nominal voltage and current of your load is compatible with the output voltage and current of your actuator.
B.R,
Chouaibou.
To control your fan with a KNX actuator, you have to use a dedicated fan actuator as the embedded electronic circuits are designed to dealt with that type of load :
Use the dedicated KNX Fan Coil Actuator MTN645094 with 3 fan stages for example or equivalent. Just make sure that nominal voltage and current of your load is compatible with the output voltage and current of your actuator.
B.R,
Chouaibou.