10.07.2018, 18:11
(09.07.2018, 21:47)Erwin van der Zwart Wrote: Hi,
Why do you need to communicate with the client HMI? When you send a new value to Wago PLC from LM, the HMI client will notice that if i'm not mistaking
BR,
Erwin
Hi,
That is correct. But the HMI has the scene buttons, so it needs to send a scene value to the LM. No need for communication from the LM to the HMI. Only HMI to the LM.
BR Even Sundgot.