CAN FT, what devices are compatible?

[edgars]

we are currently finalizing canX (our protocol over CAN FT; see here for more info) configuration app for LogicMachine.
I attach a brochure for basic information on canX protocol. Also - initial topology.
KNX to CAN - currently you can use LogicMachine for this purpose, but we are working also on a separate 2DIN device for this purpose.

Further here is a list of canX devices which soon will be available:

• Universal canX bus IO module 16 AI/DO 
  
• canX Relay Extension with 8 x 10A relays
  
• canX Dimmer Extension with 6 x 0-10V outputs and 6 x PT1000 inputs
  
• canX 10-binary input / LED control + thermostat (flush-mounted)
  
• canX DALI gateway (multi-master)
  
• canX Shutter actuator 2 x channel, 4 x pushbutton inputs
  
• CAN-CAN bus repeater / router
  
• CAN-CAN bus repeater 
  
• KNX to CAN gateway
  
• Different LMs with CAN FT and/or KNX TP1 on-board.
  
• canX sensor platform wall mounted and some other innovative ideas..