This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Lm4 building lighting
#9
(24.10.2018, 09:08)Daniel. Wrote: I'm just trying to limit the point of failure and always first is the cabling. As you mentioned floors then you have a long cable and then correct terminator is important.

I put a 120 ohm resistor at the end of the line. At noon, the leds turn off when i give black color. But the evening doesn’t close. There’s still color change on the 1st and 2st floor when the time program is actived. If i color it manually, there is no color change , the system is working properly
Reply


Messages In This Thread
Lm4 building lighting - by canberk - 24.10.2018, 07:25
RE: Lm4 building lighting - by Daniel - 24.10.2018, 07:28
RE: Lm4 building lighting - by canberk - 24.10.2018, 08:47
RE: Lm4 building lighting - by Daniel - 24.10.2018, 08:55
RE: Lm4 building lighting - by canberk - 24.10.2018, 09:04
RE: Lm4 building lighting - by Daniel - 24.10.2018, 09:08
RE: Lm4 building lighting - by canberk - 24.10.2018, 16:27
RE: Lm4 building lighting - by admin - 24.10.2018, 09:27
RE: Lm4 building lighting - by canberk - 24.10.2018, 10:07
RE: Lm4 building lighting - by Daniel - 24.10.2018, 19:44
RE: Lm4 building lighting - by canberk - 24.10.2018, 20:01
RE: Lm4 building lighting - by Daniel - 25.10.2018, 07:27

Forum Jump: