This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

New LM auto sniffing thru network
#25
(12.04.2019, 09:23)FatMax Wrote: Laptop + USB interface = attack. In a hotel room its even easier.

Yes of course you could do that. But historically this has not been a problem.


I have a good solution if you want to make the KNX bus unreachable in a hotellroom. Use Zennio quad in a junctionbox above the celing out in the hallway.
From the Quad you can use a thin cable to a standard spring loaded lightswitch. You can altso connect temp probe and Zennio motion detector with same types of cable to other Quad inputs.
If your afraid that someone will go out in the hallway and open your junction box above the ceeling and access the bus, just use one of the Zennio Quad inputs for a temper-switch on the junction box lid to start an alarm.

And if you use the Zennio inBox24 insted of the Zennio Quad, you altso will get 2x16A relays to controll lights og whatever you want for the same price (:
https://www.zennio.com/products/actuators/inbox-24

BR
Reply


Messages In This Thread
RE: New LM auto sniffing thru network - by Kai-Roger - 12.04.2019, 10:39

Forum Jump: