This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Autoreboot
#1
Hi,

I saw on LM3 V2 and LM4 that it in some circumstances can freeze and to solve this issue it must be restarted.

I remember such example:
https://openrb.com/automatic-monitoring-...processes/

I remember also that it was contained in firmware so there is no need to do it by user.

But probably it is not working properly, because e.g. I have LM3 V2 with not so old firmware and from time to time I have such issue. When it is freezed I cannot reach it in network and modbus isn't working.

I've tried to solve the reason of this problem in below post:
https://forum.logicmachine.net/showthrea...hlight=cpu

This post is from other perpective. LM should autoreboot when it detects too high load. Probably such reaction should be parametrized e.g. for one user CPU load > 1.00 for 1 minute would be good for other permanent 3.00 is ok.
Done is better than perfect
Reply


Messages In This Thread
Autoreboot - by buuuudzik - 31.12.2019, 08:21

Forum Jump: