This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Reactor remote CONN
#11
(30.09.2020, 13:10)admin Wrote: This means that LM cannot reach the remote network. Check that you have a valid gateway in LM and that you can ping VPN server from LM (System config > Status > Network utilities > Ping).

Your config is not fully valid:
1. Replace auth-user-pass in your config with dev tun0
2. Don't forget to add two pull-filter lines I've mentioned before <ca> line
 OK now works

But now is not possible to reached the LM

IP for LM 192.168.0.101 not responding

IP LM witj OpenVPN 10.8.0.10 not responding

why ?
Reply


Messages In This Thread
Reactor remote CONN - by Frank68 - 29.09.2020, 13:00
RE: Reactor remote CONN - by admin - 29.09.2020, 13:04
RE: Reactor remote CONN - by Frank68 - 29.09.2020, 13:47
RE: Reactor remote CONN - by admin - 29.09.2020, 14:03
RE: Reactor remote CONN - by Frank68 - 30.09.2020, 07:49
RE: Reactor remote CONN - by admin - 30.09.2020, 08:14
RE: Reactor remote CONN - by Frank68 - 30.09.2020, 08:55
RE: Reactor remote CONN - by admin - 30.09.2020, 09:45
RE: Reactor remote CONN - by Frank68 - 30.09.2020, 12:53
RE: Reactor remote CONN - by admin - 30.09.2020, 13:10
RE: Reactor remote CONN - by Frank68 - 30.09.2020, 13:51
RE: Reactor remote CONN - by admin - 30.09.2020, 15:22

Forum Jump: