[OLD] LogicMachine firmware 2016.07.14

[buuuudzik]

I cannot reproduce this issue, how are you setting the value to 361?

By select 360 in the Objects->Set value. This is on LoadBalancer firmware 20160301. I attached screenshots:

Angle_error01 - Typing 360 and Save
Angle_error02 - Updated GA 7/0/48 not by 360 but by 361
Angle_error03 - Open the Set value and current value is 361. When I try to change via arrows the value 361 is immediatelly changed to 360 and I can't change this to 361.