21.10.2021, 12:17
I have to setup a project:
- 1 central logicmachine (weatherstation and other knx devices)
- 28 logicmachine's to receive data from the central logicmachine
I have a setup now with default multicast ip and it works,
1
i like to use encrypted data so i enabled that. and also the only secure communication is enabled. Is it true that i can't use ets now? or is there an option to enable secure ets communication?
2
how to setup the ip > local rule and the local > ip rule on both devices to match the following:
- only data from central to the 28 lm's, not from the 28 lm's to central
- and only data from the lm 1.1.1 and the weatherstation 1.1.2 is allowed
3
Can i do more to have a safe data transmission?
4
Do i forget something?
- 1 central logicmachine (weatherstation and other knx devices)
- 28 logicmachine's to receive data from the central logicmachine
I have a setup now with default multicast ip and it works,
1
i like to use encrypted data so i enabled that. and also the only secure communication is enabled. Is it true that i can't use ets now? or is there an option to enable secure ets communication?
2
how to setup the ip > local rule and the local > ip rule on both devices to match the following:
- only data from central to the 28 lm's, not from the 28 lm's to central
- and only data from the lm 1.1.1 and the weatherstation 1.1.2 is allowed
3
Can i do more to have a safe data transmission?
4
Do i forget something?