LM KNX IP and routing

[domotiqa]

This feature was never implemented. You can take it as product limitation.

Ok i didnt know
What strange is i have another customer where there is one lss100200 and one ip interface and i can program the device of the other line

---

---

---

---

I just check my other project.

I have 1.1.0 router ip knx MTN680329 floor0
I have 1.2.0 router ip knx MTN680329 floor1

and LSS100200 on 1.1.255, so looks like its the coupler that did the job and not the LSS.

So for my project, the only solution is to add 2 IP router one to replace the LSS100100 3.1.0, and another close to the LSS100200 1.0.0.

I was badly thinking the LSS did the job (They had already one LSS100100 but add some modbus more than 10 so they bought a LSS100200 and thinking the bridge would be ok)