24.03.2023, 06:33
Thank you for your reply
I checked the LM script and found no problems. I can control another RGB lamp strip that can be addressed through the DIP switch. Therefore, I guess the reason why the RGB lamp strip under test cannot be controlled is that it has not been addressed
It would be perfect if LM could search for the max device address connected to the 485 bus.
I checked the LM script and found no problems. I can control another RGB lamp strip that can be addressed through the DIP switch. Therefore, I guess the reason why the RGB lamp strip under test cannot be controlled is that it has not been addressed
It would be perfect if LM could search for the max device address connected to the 485 bus.