No HTTP respond

[mishoboss]

1. Which firmware version are you using?
   
2. Are you connected directly on the same network or externally (VPN, ZeroTier or port forwarding)?
   
3. When the web server is not responding can you still ping LM? Check system uptime in System config > Status > System status. Maybe LM is rebooted when this happens.
   
4. Try this script and see if it helps: https://forum.logicmachine.net/showthrea...7#pid23987
   
5. Check for any errors in /var/log/nginx/error.log
   

Hi,

1. I've recently upgraded to the latest stable release - 2023.06. However I did that in hopes newer version will fix the issue if it's some kind of a known bug. This issue was present before the update and stayed after.
2. I access only via VPN and locally. Issue is with both.
3. Yes, ping works, as well as scripts. I use LM as KNX Ethernet gateway as well, and KNX works. I'm literally unable to access the web UI anymore for more than couple of seconds, so there's no way to reach System config > Status > System status.
4. Unfortunately can't access the web UI and try the script. I'll keep trying and be fast as possible.
5. Not a single error in /var/log/nginx/error.log