How to reset factory

[Hoang189]

Hello everybody,

Help me how to reset factory?


I have followed these instructions but failed


That device is LM2 model.


"How to reset LM2 to factory defaults?

Q: I want to know if it is possible to reset the LM2 to factory default? I changed the static IP to wrong one and now I can’t find it in the network.
A: By pressing the button on the side of LM2 for > 10 sec, it will be set to default factory configuration. If you press it for < 10 sec, the device will be rebooted.
There is also another possibility to discover IP address – LM2 has built-in zeroconf utility by default, so using Apple Discovery app you can discover the IP address of LM2. "

Thanks all,

[admin]

Which LM2 is it? Does it have 2x USB and separate Ethernet or 1x USB + Ethernet? Does it boot properly?

[Hoang189]

Which LM2 is it? Does it have 2x USB and separate Ethernet or 1x USB + Ethernet? Does it boot properly?

This LM2 model has 2x USB and separate Ethernet.
I did as instructed properly.

When pressing the reset button> 10s (~ 45s) without any phenomenon. 2 indicator light remains normal.

[Hoang189]

@admin
Help me, pls.

Thank so much

[admin]

Factory reset only applies to object database, visualization etc. Network settings and passwords are kept. You can do one long reset button press after device boot to set default IP - 192.168.0.10. If that does not help, the only solution is to do a full reflash. You will need a USB-UART/TTL adapter for this. Contact us by e-mail and we will send you full instructions.

[Hoang189]

Factory reset only applies to object database, visualization etc. Network settings and passwords are kept. You can do one long reset button press after device boot to set default IP - 192.168.0.10. If that does not help, the only solution is to do a full reflash. You will need a USB-UART/TTL adapter for this. Contact us by e-mail and we will send you full instructions.

Thank you very much.
I think the issue here is the need to do a full reflash.
But I do not see that this device has a memory card.
So please help me how to do a full reflash the device.
My email: smarthouse.gamma@gmail.com



thanks

[edgars]

I sent you instructions how to fully reflash old type LM2

[Hoang189]

Thank you very much.
I did successful.

[Daniel]

https://kb.logicmachine.net/misc/reflash...ng-player/

[Daniel]

This product is EOL for few years now and we do not support it any longer.