Just today I bought dongle from OpenRB, and received from Edgars zigbee-20201002.ipk I installed it over System --> Packages -->Add Package. Reboot my LM5.
After rebooting I found out that visualization not working, but ping to my LM is OK. Problem was my USB Hub, connected without additional power supply. I removed it and connected dongle directly. in log I see dongle appeared. Zigbee application anyway not seen..
Load averages: 0.02 0.12 0.30
System log
Nov 2 17:53:24 Home user.info sysinit: /lib/genohm-scada/storage/db/current.db: OK
Nov 2 17:53:22 Home kern.notice kernel: [ 15.085569] random: nonblocking pool is initialized
Nov 2 17:53:13 Home kern.info kernel: [ 6.447296] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Nov 2 17:53:09 Home kern.info kernel: [ 2.578503] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc
Nov 2 17:53:09 Home user.info sysinit: /dev/mmcblk0p3: clean, 3434/958464 files, 119851/3830528 blocks
Nov 2 17:53:09 Home user.info sysinit: e2fsck 1.45.6 (20-Mar-2020)
Nov 2 17:53:09 Home kern.info kernel: [ 2.416327] fec 2188000.ethernet eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=-1)
Nov 2 17:53:08 Home kern.info kernel: [ 1.348568] fec 2188000.ethernet eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=-1)
Nov 2 17:53:08 Home kern.info kernel: [ 0.931835] EXT4-fs (mmcblk0p2): re-mounted. Opts: nodelalloc
Nov 2 17:53:08 Home kern.info kernel: [ 0.741077] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
Nov 2 17:53:08 Home kern.info kernel: [ 0.738598] usb 1-1: SerialNumber: __0X00124B0014DBCDAB
Nov 2 17:53:08 Home kern.info kernel: [ 0.738587] usb 1-1: Manufacturer: Texas Instruments
Nov 2 17:53:08 Home kern.info kernel: [ 0.738575] usb 1-1: Product: TI CC2531 USB CDC
Nov 2 17:53:08 Home kern.info kernel: [ 0.738563] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 2 17:53:08 Home kern.info kernel: [ 0.738540] usb 1-1: New USB device found, idVendor=0451, idProduct=16a8
Nov 2 17:53:08 Home kern.info kernel: [ 0.594859] usb 1-1: new full-speed USB device number 2 using ci_hdrc
Nov 2 17:53:08 Home kern.info kernel: [ 0.512706] Freeing unused kernel memory: 164K
Nov 2 17:53:08 Home kern.info kernel: [ 0.512447] VFS: Mounted root (ext3 filesystem) on device 179:2.
Nov 2 17:53:08 Home kern.info kernel: [ 0.512362] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Nov 2 17:53:08 Home kern.info kernel: [ 0.414782] mmcblk0: p1 p2 p3
Nov 2 17:53:08 Home kern.info kernel: [ 0.413163] mmcblk0: mmc0:59b4 USDU1 14.9 GiB
Nov 2 17:53:08 Home kern.info kernel: [ 0.412393] mmc0: new high speed SDHC card at address 59b4
Nov 2 17:53:08 Home kern.warn kernel: [ 0.406362] mmc0: host does not support reading read-only switch, assuming write-enable
Nov 2 17:53:08 Home kern.info kernel: [ 0.391063] Waiting for root device /dev/mmcblk0p2...
Nov 2 17:53:08 Home kern.err kernel: [ 0.390998] Warning: unable to open an initial console.
Nov 2 17:53:08 Home kern.info kernel: [ 0.390598] vdd3p0: disabling
Nov 2 17:53:08 Home kern.info kernel: [ 0.390022] rtc-pcf85263a 0-0051: setting system clock to 2020-11-02 17:53:07 UTC (1604339587)
Nov 2 17:53:08 Home kern.info kernel: [ 0.384636] can: raw protocol (rev 20120528)
Nov 2 17:53:08 Home kern.info kernel: [ 0.384609] NET: Registered protocol family 29
Nov 2 17:53:08 Home kern.info kernel: [ 0.384452] can: controller area network core (rev 20120528 abi 9)
Nov 2 17:53:08 Home kern.info kernel: [ 0.384414] NET: Registered protocol family 17
Nov 2 17:53:08 Home kern.info kernel: [ 0.384292] ip_tables: © 2000-2006 Netfilter Core Team
Nov 2 17:53:08 Home kern.warn kernel: [ 0.365440] 2198000.adc supply vref not found, using dummy regulator
Nov 2 17:53:08 Home kern.info kernel: [ 0.350925] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
Nov 2 17:53:08 Home kern.info kernel: [ 0.313128] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
Nov 2 17:53:08 Home kern.info kernel: [ 0.313087] sdhci-esdhc-imx 2194000.usdhc: No vmmc regulator found
Nov 2 17:53:08 Home kern.info kernel: [ 0.310368] sdhci-pltfm: SDHCI platform and OF driver helper
Nov 2 17:53:08 Home kern.info kernel: [ 0.310354] sdhci: Copyright© Pierre Ossman
Nov 2 17:53:08 Home kern.info kernel: [ 0.310327] sdhci: Secure Digital Host Controller Interface driver
Nov 2 17:53:08 Home kern.info kernel: [ 0.309328] usbcore: registered new interface driver btusb
Nov 2 17:53:08 Home kern.info kernel: [ 0.308521] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
Nov 2 17:53:08 Home kern.info kernel: [ 0.307362] lirc_dev: IR Remote Control driver registered, major 249
Nov 2 17:53:08 Home kern.info kernel: [ 0.306448] i2c /dev entries driver
Nov 2 17:53:08 Home kern.info kernel: [ 0.306194] rtc-pcf85263a 0-0051: rtc core: registered rtc-pcf85263a as rtc0
Nov 2 17:53:08 Home kern.warn kernel: [ 0.302540] rtc-ds1307: probe of 0-006f failed with error -5
Nov 2 17:53:08 Home kern.info kernel: [ 0.300786] hub 2-0:1.0: 1 port detected
Nov 2 17:53:08 Home kern.info kernel: [ 0.300669] hub 2-0:1.0: USB hub found
Nov 2 17:53:08 Home kern.info kernel: [ 0.299335] usb usb2: SerialNumber: ci_hdrc.1
Nov 2 17:53:08 Home kern.info kernel: [ 0.299312] usb usb2: Manufacturer: Linux 4.4.231 ehci_hcd
Nov 2 17:53:08 Home kern.info kernel: [ 0.299291] usb usb2: Product: EHCI Host Controller
packages (part):
zigbee
20201002
zlib
1.2.11-1
Pics of applications: