Zigbee gateway integration

[admin]

@Bitver, I've had a look at Xiaomi devices and unfortunately all of them have non-standard behavior. It is quite to hard to add them without having an actual device to test. I can provide an example of how to monitor ZigBee messages via a script and implement your own actions based on this.

[alexgleyzer]

Dear friends, I am just starting my ZigBee experience, looking for some water leak sensors and fire alarm sensors. What usb-device should I purchase to connect to Wiser for KNX? What sensors are good and easy to connect and control?
Thank you!!

[admin]

ZigBee is only supported in LM at the moment.

[Erwin van der Zwart]

Wait for L&B 2022 (:

[alexgleyzer]

Maybe I should go for LM instead of Wizer?)) How do I get it?

[Daniel]

Maybe I should go for LM instead of Wizer?)) How do I get it?

Contact our office https://openrb.com/contact-us/

[tomnord]

Wait for L&B 2022 (:

Erwin, you need to give us something more than this tease 

[benanderson_475]

@Bitver, I've had a look at Xiaomi devices and unfortunately all of them have non-standard behavior. It is quite to hard to add them without having an actual device to test. I can provide an example of how to monitor ZigBee messages via a script and implement your own actions based on this.

This would be useful to me, example of how to monitor ZigBee messages via a script, i too am using Xioami devices.

Many Thanks

[Evens]

Hi,

Today i tried some Elko Smartplugs, the on/off command works, but something strange with the feedbacks.
is this a bug or have i done something wrong in the setup?

there are 3 commands available:

On/off - Works perfectly
On/off Status - Does not work on GA, but works in Zigbee app
Active power - Does not work on GA and in Zigbee app

The Elko Smartplug is recognised as "Schneider Electric - SMARTPLUG/1" in the Zigbee app.

BR Even Sundgot.

[admin]

For status and active power management a profile should be added. Can you provide a screenshot of the device info (click "i" icon in the list)?
Status is a tricky topic in ZigBee. There's no standard algorithm so some devices might not send the status when you control them via ZigBee, only when a physical button is pressed. Certain lamps do not report color status at all. Some lamps/dimmers will report "off" state when level is set to 0 but others will not.

[Evens]

For status and active power management a profile should be added. Can you provide a screenshot of the device info (click "i" icon in the list)?
Status is a tricky topic in ZigBee. There's no standard algorithm so some devices might not send the status when you control them via ZigBee, only when a physical button is pressed. Certain lamps do not report color status at all. Some lamps/dimmers will report "off" state when level is set to 0 but others will not.

thanks for the information, see Attached photo of the decive. 

   

[admin]

ZigBee app update has been published.

Warning unfortunately due to an old bug in the network configuration you will have re-pair all ZigBee devices after this update. This is only needed once when upgrading from an older version.

Library docs: https://openrb.com/docs/zigbee.htm

[Evens]

ZigBee app update has been published.

Warning unfortunately due to an old bug in the network configuration you will have re-pair all ZigBee devices after this update. This is only needed once when upgrading from an older version.

Library docs: https://openrb.com/docs/zigbee.htm

Now it works perfectly, thanks

[Erwin van der Zwart]

Can we add this iTRV device in the next update for my own private usage (:

Code:

Device type: End device
Power source: Battery
Receive when idle: No

Endpoint 1
Profile: 260
Input clusters:
- Basic (0)
- PowerCfg (1)
- Identify (3)
- PollCtrl (32)
- HvacThermostat (513)
- HvacUserInterfaceCfg (516)
- HaDiagnostic (2821)
- 65027
Output clusters:
- Basic (0)
- Ota (25)

Endpoint 2
Profile: 260
Output clusters:
- HvacThermostat (513)

Thanks!

[Daniel]

SE iTRV is on our list, sooner or later will be added.

[Evens]

Is the SE Powertag also on that list?

[Daniel]

It was removed by SE.

[Evens]

Thats too bad, would have been nice to integrate powertags also.

[gtsamis]

Is a profile for the below TRV possible?
Manufacturer / Model: _TZE200_b6wax7g0 - TS0601

Code:

Device type: End device
Power source: Battery
Receive when idle: No

Endpoint 1
Profile: 260
Input clusters:
- Basic (0)
- Groups (4)
- Scenes (5)
- 61184
Output clusters:
- Ota (25)
- Time (10)

[admin]

@gtsamis, it is more complicated because this device does not use standard ZigBee clusters. Instead it only uses ZigBee as a transport for TRV control and status messages. Some more info on this: https://medium.com/@dzegarra/zigbee2mqtt...92707e882d