Posts: 45
Threads: 14
Joined: Aug 2021
Reputation:
0
Hi,
Sometimes it can be useful to have the ability to capture/sniff the telegrams over KNX/TP - for example in case of a storm/loop of some sort.
Is there something we can use to do this, kind of a tcpdump for KNX?
Thank you!
Morkov
Posts: 4572
Threads: 23
Joined: Aug 2017
Reputation:
206
KNX is a multicast, everything goes everywhere. You can only use filters between lines
------------------------------
Ctrl+F5
Posts: 45
Threads: 14
Joined: Aug 2021
Reputation:
0
Ok.
Is it possible to display (sniff/capture) the telegrams on the bus?
Thank you!
Morkov
Posts: 4572
Threads: 23
Joined: Aug 2017
Reputation:
206
You have KNX statistics which shows you the traffic.
------------------------------
Ctrl+F5
Posts: 45
Threads: 14
Joined: Aug 2021
Reputation:
0
It shows me statistics - not the traffic.
I want to see:
- sender IA
- destination IA/GA
- type of request - e.g. read/write
- data
If you're familiar with network tools such as 'tcpdump', 'wireshark' - I mean the same thing, just for KNX.
Thank you!
Morkov
Posts: 4572
Threads: 23
Joined: Aug 2017
Reputation:
206
There is app for it but has to be uploaded manually via FTP to apps. Unzip and upload to data folder
------------------------------
Ctrl+F5