LM5 - BACnet

[Fahd]

Hi, 

When I try to read the LM5 BACnet objects from yabe I can't read the value from the first read request 
I always have try more than once to read the value, the same behavior happened with a spacelynk and  lm5
you can see the attachment    

[admin]

Do you have BACnet client app installed?

[Fahd]

Do you have BACnet client app installed?

Yes

[Fahd]

Do you have BACnet client app installed?

Yes

It seems a similar problem as the post below, but I don't have any BACnet script!

https://forum.logicmachine.net/showthrea...ad+request

[admin]

Uninstall the client app and see if it works.

[Fahd]

Uninstall the client app and see if it works.

yes, that makes it work or changing the BACnet port as long as I want to take some BACnet points from an AHU, 
and here I am facing this issue, 

1 - The BACnet SCADA packages detect only 1 AHU and 1 heating central but in the network, I have  3 AHUs and  1 heating central ( I can see 4 of them from YABE )
2 - When I press on scan selected on the BACnet SCADA packages interface, it keeps scanning for 1 minute, and then it shows an error  " Cannot run a scan while local BACnet server is running on the same port ", I already changed the BACnet port to 47809
3 - From the BACnet client app I can see all of the BACnet devices but when I scan any of them they don't display any BACnet point.

I hope you could help me with that.

[admin]

The scada package might not work correctly if the BACnet app is installed. Uninstall the app and try again. You can also run a basic scan of all BACnet devices from a script:

Code:

res = io.readproc('bacwi')
log(res)

You should get a list of device IDs and respective IP addresses.

[Fahd]

The scada package might not work correctly if the BACnet app is installed. Uninstall the app and try again. You can also run a basic scan of all BACnet devices from a script:

Code:

res = io.readproc('bacwi')
log(res)

You should get a list of device IDs and respective IP addresses.

Hi, 

Yes I got the list ,
string: 1200 192.168.10.11
1889 192.168.10.121
1888 192.168.10.122
2107393 192.168.10.115

When I deleted bacnet client app the object appeared in the scada package  , but when I do the opposite I can't see the objects from bacnet client app,
I have to see  the objects from the app because it's easier to map them from it.

[Fahd]

The scada package might not work correctly if the BACnet app is installed. Uninstall the app and try again. You can also run a basic scan of all BACnet devices from a script:

Code:

res = io.readproc('bacwi')
log(res)

You should get a list of device IDs and respective IP addresses.

Hi, 

Yes I got the list ,
string: 1200 192.168.10.11
1889 192.168.10.121
1888 192.168.10.122
2107393 192.168.10.115

When I deleted bacnet client app the object appeared in the scada package  , but when I do the opposite I can't see the objects from bacnet client app,
I have to see  the objects from the app because it's easier to map them from it.

I couldn't see the object because of this script 
res = io.readproc('bacwi')

log(res).

I just deleted it and everything looks fine