Image not loading

[BMSimon]

In my visualization I have a widget to open/close my gate, It works perfectly.
I have some surveillance cameras (unifi bullet4) In their settings I can enabled "Anonymous Snapshot", and when I go to http://192.168.1.46/snap.jpeg from chrome I can see a snapshot from the camera, just what I want.
But when I use the "image" in visualizations plan editor the image is not loaded, but if I right click it and choose "Open link in new tab" it works.
But it adds something to the url:
http://192.168.1.46/snap.jpeg?_nc=o85lppzhde

Everything is testet both from my local network and from external, with same result

---

If I inspect the image not loading in chrome and go to network this comes up:

[admin]

If you are connected via HTTPS to your controller then the browser will block loading of all non-HTTPS resources.

[BMSimon]

If you are connected via HTTPS to your controller then the browser will block loading of all non-HTTPS resources.

Thanks alot, i just figured it out 10 sec ago

[baggins]

If you are connected via HTTPS to your controller then the browser will block loading of all non-HTTPS resources.

I have the same problem but I already connect to my LM through http...
There is no problem with Firefox under both Linux and Windows but I can't get it to work with Opera, Chrome, Chromium or Edge!

I've tried enabling almost everything in Opera and Chromium without result.
Is there some specific setting needed on these browsers?

[admin]

Check the browser console / network tab (F12). It will show why the images are not loading. Which LM firmware are you using?

[baggins]

Check the browser console / network tab (F12). It will show why the images are not loading. Which LM firmware are you using?

It says (blocked:origin)...

LM firmware 20160714 which I cannot update...

[admin]

Do you have the image in http://user:pass@... format?

[baggins]

Do you have the image in http://user:pass@... format?

Yes...

[admin]

This URL format has been blocked in browsers for security reasons for some time already.

[baggins]

This URL format has been blocked in browsers for security reasons for some time already.

I am aware of this (I am currently building a proxy server for my camera's for that reason) but this keeps working in Firefox for some reason...

Since I also have this problem (https://forum.logicmachine.net/showthread.php?tid=4532)  in Firefox but not in Opera, I was planning on switching to Opera or Chromium but then ran into the camera problem.

The gauges never had a problem for years but then started moving around. Why does fixing this require new firmware (which I cannot install unfortunately)?

Thanks for your great support as always!

[admin]

Run this once, clear browser cache and see if gauge starts working correctly. LM must have internet connection for this work.

Code:

os.execute('mv -n /www/scada/vis/gauge.js.gz /www/scada/vis/gauge-old.js.gz')
os.execute('rm -f /www/scada/vis/gauge.js.gz')
os.execute('wget -O /www/scada/vis/gauge.js.gz http://dl.openrb.com/misc/gauge.js.gz')

In case something goes wrong you can revert the gauge file this way:

Code:

os.execute('cp -f /www/scada/vis/gauge-old.js.gz /www/scada/vis/gauge.js.gz')

[baggins]

Run this once, clear browser cache and see if gauge starts working correctly. LM must have internet connection for this work.

Code:

os.execute('mv -n /www/scada/vis/gauge.js.gz /www/scada/vis/gauge-old.js.gz')
os.execute('rm -f /www/scada/vis/gauge.js.gz')
os.execute('wget -O /www/scada/vis/gauge.js.gz http://dl.openrb.com/misc/gauge.js.gz')

In case something goes wrong you can revert the gauge file this way:

Code:

os.execute('cp -f /www/scada/vis/gauge-old.js.gz /www/scada/vis/gauge.js.gz')

There is no gauge.js.gz in /www/scada/vis.
ls -l of /www/scada/vis yields:

Code:

-rw-r--r--    1 root     root            42 Jun 21  2016 brand.css.gz
-rw-r--r--    1 root     root           719 Jul  1  2016 busdecode.js.gz
-rw-r--r--    1 root     root          9786 Jun 21  2016 controls.js.gz
-rw-r--r--    1 root     root         12617 Jul 13  2016 core.js.gz
lrwxrwxrwx    1 root     root            36 Feb 12 14:00 custom.css -> /lib/genohm-scada/storage/custom.css
lrwxrwxrwx    1 root     root            35 Feb 12 14:00 custom.js -> /lib/genohm-scada/storage/custom.js
-rw-r--r--    1 root     root         34885 Jun 21  2016 dygraph.js.gz
-rw-r--r--    1 root     root         18513 Jun 21  2016 flotr2.js.gz
-rw-r--r--    1 root     root          3240 Jun 21  2016 icons.ttf
-rw-r--r--    1 root     root          2160 Jun 21  2016 icons.woff
-rw-r--r--    1 root     root         30724 Jun 21  2016 jquery.js.gz
-rw-r--r--    1 root     root          5992 Jun 21  2016 layout.css.gz
-rw-r--r--    1 root     root          4231 Jun 21  2016 schedulers.js.gz
-rw-r--r--    1 root     root          2378 Jun 21  2016 theme.css.gz
-rw-r--r--    1 root     root          3641 Jun 21  2016 trends.js.gz
-rw-r--r--    1 root     root          9681 Jun 21  2016 velocity.js.gz

Edit: just found out that gauge.js.gz is in /www/scada/resources.
I suppose I can run the same commands in that directory?

[admin]

It might be in resources instead of vis.

[baggins]

It might be in resources instead of vis.

I did not change the gauge.js.gz yet because strangely enough, since Firefox was updated to version 111.0.1 the problem has disappeared!