18.05.2023, 10:26
Hi,
We are communicating with a Modbus device which has a 3 byte point. We are sending 128 Value which should be 00 00 80 in HEX format. But Modbus device is getting 80 00 00 value which is 8.388.608 as a DEC.
How we can send these 3 byte as correct HEX format ?
We are communicating with a Modbus device which has a 3 byte point. We are sending 128 Value which should be 00 00 80 in HEX format. But Modbus device is getting 80 00 00 value which is 8.388.608 as a DEC.
How we can send these 3 byte as correct HEX format ?
