This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

URGENT: Logic Machine 3 is not booting
#1
Dear all,

We have installed a Logic Machine 3 device that doesn't seems to work anymore. It doesn't not show any activity on both upper Leds and network.
Can I take out the memory card and just replaced it with any other Logic Machine 5 memory card? or Can I take the memory card and copy its content over? or Do I have to use an old backup?

Thanks & Regards,

Sumit Bhadra
Reply
#2
Follow this guide: https://openrb.com/reflash-logicmachine3...-software/
Use this recovery firmware: https://dl.openrb.com/recovery-mxs-1g.img.gz

If the old card is still readable you can try copying data from the 3rd partition of the old card to the new. This can be done on any PC running Linux. Otherwise restore a backup.
Reply


Forum Jump: